95221 3d models found related to harbor freight battery carrier.
Harbor Freight Battery Adaptor
thingiverse
This part allows you to connect your device to a cheap Harbor Freight drill battery while still being able to easily remove and charge on the standard charger. The batteries provide 18V of power and have a 1.3Ah capacity. With a simple regulator, you...
Harbor Freight Battery Switch Mount
thingiverse
I sought out a way to mount a Harbor Freight battery disconnect switch on a flat surface. They are designed for panel mounting, which presented a challenge. I devised a solution.To refine the design, I decided to give it a cleaner look. Here is the...
Harbor Freight Caliper Battery Cover
thingiverse
One of the prongs on my Harbor Freight 6" caliper's battery cover snapped off. The cover still functioned, but it often fell off. In the end, I lost it completely. Searching online brought up several different battery cover models on Thingiverse. It...
Harbor Freight Electric Fly Swatter Battery Lid
thingiverse
Replacement battery compartment lid for Harbor Freight Electronic Fly Swatter, SKUs 62540, 40122, 61351, 62577, 63681.
Harbor Freight Flash Light 18500 Battery Adapter
thingiverse
... printed in spiral or vase mode to save filament. ... It should allow Harbor Freight and similar flashlights to use a 18500 battery without it rattling around inside the flashlight. ... You can find 18500 batteries on Amazon, Ebay and most battery store
Bauer 20v Battery Cover (Harbor Freight)
thingiverse
I recently purchased some tools from Harbor Freight that use a Bauer lithium battery. There are no covers for the contacts of the spare batteries so I design one. You don't want one of these shorting out and starting a fire.The first time I...
Harbor Freight Bauer 20V battery holders
prusaprinters
Battery holders for the 20V Bauer batteries sold at Harbor Freight.I only have the 1.5 and 3Ah batteries, so could only make models for them, and not the 5Ah one.Holder has 2x#8 countersunk holes for mounting.I have only tested the 1.5Ah one and it...
12v Harbor freight battery to cord converter
thingiverse
I converted my old 12V impact driver from Harbor Freight into a corded tool, allowing me to use it in my truck after the battery gave out. It simply snaps in place, and you'll need to utilize Anderson connectors, rated for around 40 amps, using a 12V...
Harbor Freight Battery Cutoff / Disconnect Switch
thingiverse
I picked up a basic cut off switch for my RV from Harbor Freight and found their model 63425 to be an excellent choice: https://www.harborfreight.com/Battery-Cutoff-Switch-63425.html. However, it wasn't designed with a flush mount, so I planned to...
Harbor Freight (Pittsburgh) Caliper Battery Cover
thingiverse
Lost your battery cover to those cheap calipers from Harbor Freight? Don't worry, print a new one! It fits model #68304 or similar models perfectly. To get the best results, make sure the battery cavity side is facing down towards the bed of your 3D...
Harbor Freight Flashlight 18650 Battery Mod
thingiverse
This was a free flashlight from Harbor Freight that saw little use because of its AAA batteries. I thought the best solution would be to use a reclaimed 18650 cell from a laptop that had a less than desirable capacity so both items would have a new...
Cen-Tech (Harbor Freight) Micrometer Battery Cover
thingiverse
I'm going to post this text instead: This is a battery cover for a vintage Cen-Tech Micrometer from Harbor Freight. The odds of anyone else having the same micrometer, a 3D printer, and a missing battery cover are probably low, but what's the harm in...
Harbor Freight 18650 Flashlight Battery Adapter
thingiverse
If you're like me, you likely have a stash of Harbor Freight flashlights collecting dust. The issue is that they demand AAA batteries, which rapidly lose power. In contrast, I've accumulated numerous salvaged 18650 lithium ion cells just waiting to...
Bauer 20v Battery Cover (Harbor Freight)
prusaprinters
I recently purchased some tools from Harbor Freight that use a Bauer lithium battery. There are no covers for the contacts of the spare batteries so I design one. You don't want one of these shorting out and starting a fire.</p><p>The first time I...
Pittsburgh Caliper (Harbor Freight) Battery Cover
thingiverse
I created this battery cover for the 6" Harbor Freight Pittsburgh Digital Caliper using Fusion 360. My classroom has over 20 of these calipers and magically 12 of them came up missing battery covers so I got creative. I printed this vertically and...
Pittsburgh Harbor Freight cheap caliper battery cover
thingiverse
I always lose the battery cover on these things, got tired of using hot glue
Harbor Freight Measuring Wheel Battery Cover
thingiverse
The battery cover for this measuring wheel was lost and I didn't see any option about ordering a replacement part. So I measured the battery compartment details and recreated in data. ... After many adjustments, this seems to fit well and will not fall...
Bauer 20V Battery Cover (Harbor Freight)
thingiverse
Bauer Lithium batteries don't come with covers and exposed contacts can short out and cause a dangerous fire. ...I came up with a simple design that prints pretty quickly and snaps in place using the release button.
dewalt 20v battery to charge harbor freight bauer tools
thingiverse
this is a remix to get my 20v dewalt batteries to power Harbor Freight Bauer tools. Look at the source of this re-mix to see how to add the circuit to protect against draining the battery too much. ...
Battery lid for Harbor Freight Caliper item 68304
thingiverse
I'm unveiling my first public design, and I'm thrilled that the battery compartment on my dial caliper (Harbor Freight item 68304) stays firmly in place without any drops. It may not be a masterpiece, but it successfully secures the battery with no...
SDM Neptune Harbor Freight RC Boat Battery Adapter
thingiverse
My son got a Harbor Freight RC boat from my dad for his birthday, and it's a real speed demon right out of the box. We wanted to pick up an extra battery pack so we could spend more time cruising around the lake and less time waiting for a charger,...
Harbor Freight 20v Bauer battery charger (early version) wall mount
prusaprinters
<p>You will need some longer 3mm x 20mm length screws to make this work.</p><p>The original screws are Torx T10 security heads. ... Luckily Harbor Freight sells a set of security bits needed to remove them.
Milwaukee M18 Battery To Harbor Freight Bauer 20V Tools
thingiverse
The Bauer tool line from Harbor Freight has some rather nice tools available at an attractive price point, but I have no desire to own and maintain a second battery ecosystem. There are a number of tools either not available from Milwaukee, or that I...
Battery Adapter for Harbor Freight LED Light 18500
thingiverse
Replaces the 3 AAA Batteries (Holder) with a 18500.....
Harbor Freight Workbench handle
thingiverse
Ahegao handle for harbor freight workbench drawer.
Harbor Freight LED
thingiverse
You can easily upgrade the free Harbor Freight LED by swapping it with an 18650 battery, taking advantage of its similar 3-volt output to standard AAA batteries.
Harbor Freight Probe Box
thingiverse
A box and lid to securely hold set of Harbor Freight Probes. ... There is a remix that is a box for mini files from Harbor Freight as well.
Harbor Freight Featherboard inserts
cults3d
I made these for the Harbor freight featherboard. ...The original inserts do not fit the Harbor Freight 10" table saw so I made new ones.
Harbor Freight Vice Pad
thingiverse
I think this is the medium size vice from Harbor Freight best printed out of TPU.
Harbor Freight flashlight cover
thingiverse
This is a red diffuser for a Harbor Freight flashlight. I needed to use my flashlight at night while keeping my night vision....
battlestar galactica pinesb boba fettsnow blower oshkoshmale hose plugeod breacher bardesk bridgehb lcskier cookie cuttertheatre trophyear gauges 10mm
- « previous
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 3174
- 3175
- next »